Tá Luoyang Anjing Intelligence Equipment ina cheannaire domhanda i bhfoirnéisí leictreacha ardteochta
Foirnéise Bosca Fholúis (Top And Bottom Heating)
Paraiméadair TÁIRGÍ
Cur síos
1000℃ Atmosphere-Protected Box Furnace
This 1000℃ vacuum atmosphere box furnace features an upper and lower heating structure, specifically designed for high-uniformity atmosphere sintering, cóireáil teasa, and materials experimentation. The equipment utilizes high-purity alumina lightweight insulation material and an upper and lower distributed high-temperature alloy resistance wire heating system to achieve a stable and uniform temperature environment.
The box furnace supports vacuum and protective atmosphere operation and features intelligent flow control, automatic furnace pressure adjustment, and oxygen content monitoring, meeting the needs of high-precision atmosphere experiments and industrial heat treatment. This equipment employs an intelligent PID programmable temperature control system, supporting 50-segment program control, automatic intake and exhaust regulation, and rapid cooling control, making it an ideal device for high-end atmosphere sintering and materials research.
Product Features（ Box Furnace）
- Uniform Temperature Distribution with Top and Bottom Plane Heating
Heating elements are embedded in the furnace bottom and top planes, arranged vertically and protected by ceramic sheaths, forming a bidirectional heating field. Compared to traditional side heating methods,
- Flat Top Structure Design with Strong Load-Bearing Capacity
The furnace top adopts a flat top structure, using beams and support plates made of reaction-sintered silicon carbide material, offering excellent temperature resistance. The furnace top insulation structure consists of ≥2 layers of fiberboard resistant to 1400℃, ≥1 layer of cotton board resistant to 1260℃, and ≥1 layer of cotton board resistant to 1000℃.
- Bottom Air Inlet with Six Uniformly Distributed Paths
Nitrogen gas is injected from the bottom of the furnace body, with a flow meter installed at the bottom. There is one air inlet equipped with a flow meter and valve. The air flow rate can be set by time period on the touchscreen, and the flow rate and pressure are displayed and recorded in real time.
- L-Shaped Exhaust with Anti-Backflow Design
There is one exhaust port (with a regulating valve), using an L-shaped bend exhaust hole. The exhaust pipe is made of SUS304 stainless steel, with a ceramic tube lined the exhaust pipe connected to the furnace body. The exhaust branch pipes and main exhaust pipes use a horn-shaped exhaust system. A temperature sensor is installed on the main exhaust pipe, and the temperature is displayed in real-time on the touchscreen. A manually controlled ceramic slide valve is installed on the exhaust pipe for easy operation.
- Multi-point monitoring for safety and reliability
The rear of the furnace body is equipped with an atmosphere test port, a furnace pressure monitoring port (equipped with a furnace pressure gauge for real-time monitoring of the furnace pressure), and an online temperature measuring thermocouple.
| Temperature | 1000℃ |
| Spás Luchtaithe Éifeachtach | 330mm (L) × 330mm (W) × 100mm (H) |
| Soláthar Cumhachta AC | 380V |
| Cumhacht | 10KW |
| Raon Rialaithe | 80 to 1000℃ |
| Eilimint Tomhais Teochta | Type K thermocouple, measuring range 0-1320℃ |
| Suíomh Suiteáil Eilimint Téimh | Evenly distributed on both sides of the furnace chamber |
| Cruinneas Rialaithe Teochta | ±1 ℃ (integrated circuit control, no overshoot) |
| Aonfhoirmeacht Teocht na Foirnéise | ±5 ℃ (depending on chamber size) |
| Ráta Téimh | Inchoigeartaithe saor in aisce: max 15℃/min, min 1℃/h |
| Eilimint Téimh | Embedded in furnace bottom and top planes (socrú uachtair agus íochtair), with ceramic sheath protection |
| Corp Foirnéise | CNC meaisínithe, snasta, talamh, picilte, fosfáitithe, púdar brataithe, ard-teocht bácáilte. Aesthetic appearance, ocsaídiúcháin / aigéad / alcaile / creimeadh / teocht ard resistant, éasca a ghlanadh |
| Furnace Body Structure | Dearadh barr cothrom, bíomaí cairbíde sileacain imoibriú-nasctha agus plátaí tacaíochta, ≥2 layers 1400℃ fiberboard, ≥1 ciseal 1260 ℃ clár snáithíneach, ≥1 ciseal 1000 ℃ clár snáithíneach, tiús iomlán ≥200mm |
| Modh Oscailte Doras | 180° oscailt taobh aiseach, door can rotate 360°. Stainless steel spring lock below door, spring elasticity absorbs refractory expansion, ensuring seal |
| Ábhar teasfhulangach | Vacuum-formed high-purity alumina lightweight material; furnace mouth and bottom use lightweight hollow ball alumina plate, high service temperature, stóráil teasa íseal, thermal shock resistance, good insulation |
| Furnace Shell Temperature | <45℃ during long-term continuous operation |
| Protection | Integrated modular control unit, dual-loop control and protection: overshoot, over/under regulation, broken thermocouple, caillteanas chéim, overvoltage, overcurrent, overtemperature, current feedback, soft start, srl. |
| Control | Closed-loop thyristor module trigger control, phase-shift triggering. Output continuously adjustable with constant voltage/current/power characteristics, protecting heating elements |
| Temperature Curve Setting | Intelligent temperature controller supporting PID/APID/MPT adjustment, self-tuning/self-learning, no overshoot/undershoot, 50-segment program control, arbitrary ramp heating/cooling, program modifiable during operation, curve fitting for smooth control |
| Multi-Curve Input | 50-segment program control function |
| Air Intake | One port (with flow meter and valve). Gas flow can be set by time segment on touch screen, with real-time flow and pressure display/recording. Nitrogen enters from furnace bottom, flow meter installed at bottom |
| Exhaust Port | One port (with调节阀). L-shaped exhaust port. Main gas line divides into 6 branches evenly distributed on left/right sides, each branch has 4 small holes on side (top plugged) to prevent direct airflow冲击 on materials. Exhaust pipe: SUS304, ceramic tube lining at connection to furnace. Branch exhaust uses bellows connection to main pipe. Temperature sensor on main exhaust pipe, temperature displayed on touch screen. Manual ceramic slide valve on exhaust line |
| Rapid Cooling | Max speed 5℃/min (fully opening intake and exhaust), adjustment accuracy 1℃/min |
| Water/Oxygen Control Inside Chamber | Equipped with oxygen analyzer, water/oxygen content ≤90ppm |
| Support Rollers | Reaction-bonded silicon carbide material, longitudinally arranged for easy sagger handling |
| Variable Frequency Exhaust Fan | Automatic furnace pressure control, furnace pressure displayed and recorded on touch screen. Impeller and housing: SUS304, air volume ≥200m³/h, temperature resistance ≥350℃, pressure ≥1000Pa |
| Test Ports | 1. One atmosphere test port at furnace back 2. One furnace pressure monitoring port at furnace back with pressure gauge for real-time monitoring 3. One online temperature measuring thermocouple at furnace back, plus one additional temperature measuring port at symmetrical position (with cap for idle sealing) |
Application Areas（Box Furnace）
- Flat Material Heat Treatment: Oiriúnach do annealing, shintéiriú, and degassing processes of sheet, plate, and film materials. Effective loading space is 330mm × 330mm × 100mm. The top and bottom heating design ensures uniform heating of the flat material’s upper and lower surfaces.
- Electronic Ceramic and Substrate Sintering: Suitable for debinding and sintering of electronic ceramic materials such as alumina, aluminum nitride ceramic substrates, PTC/NTC thermistor sheets, and piezoelectric ceramic sheets. The atmosphere is controllable, with an oxygen content ≤90ppm.
- Semiconductor Material Processing: Suitable for high-temperature annealing and atmosphere treatment of materials such as silicon wafers, silicon carbide wafers, and semiconductor films, meeting the process requirements of high cleanliness and high uniformity.
- High-Precision Powder Processing: Suitable for drying, calcining, and pre-firing processes of powder materials. The bottom six-way air inlet design ensures uniform atmosphere throughout the powder, preventing material scattering caused by direct airflow.
- New material research and development: Applicable to process research and small-batch production of new materials such as composite materials, nanomaterials, and special coatings, with 50-segment program control to meet the requirements of complex temperature curves.
Próifíl na Cuideachta
Is fiontar gairmiúil atá ag speisialú i seirbhísí teicneolaíochta cóireála teasa agus an R&D, déantúsaíocht, agus díolachán foirnéisí leictreacha ardteochta.
Díríonn an chuideachta ar fhoirnéisí leictreacha ardteochta a fhorbairt a chlúdaíonn raon teochta iomlán de -100 ℃ go 2600 ℃. Áirítear ar a chuid táirgí foirnéisí leictreacha turgnamhacha, foirnéisí atmaisféar bhfolús, áitheanna tionsclaíochta, agus trealamh téimh ionduchtaithe meánmhinicíochta. I measc na dtáirgí is mó tá foirnéisí bosca, foirnéisí feadán, foirnéisí ardaithe, áitheanna pusher, foirnéisí bogie, áitheanna rothlacha, áitheanna tolláin, agus foirnéisí meán-minicíochta speisialaithe éagsúla.
Cloíonn an chuideachta le nuálaíocht theicneolaíoch agus tá deimhnithe ISO9001 agus CE an AE faighte aici. Is leis 21 trádmharcanna cláraithe, 29 paitinní, agus 27 cóipchearta bogearraí.
Modhanna Íocaíochta
TT
Modhanna Loingsiú
Tá an foirnéis leictreach pacáistithe i dtrí shraith: fillte ar dtús i páipéar cúr, fillte ansin i scannán plaisteach, agus ar deireadh pacáilte i gcliathbhosca adhmaid.
Box Furnace Frequently Asked Questions (CCanna)
- What gas environments is this atmosphere furnace suitable for?
Suitable for nitrogen and various protective atmospheres, adjustable according to process requirements.
- What are the advantages of the top and bottom heating structure?
Top and bottom heating effectively improves the uniformity of the furnace temperature field, reduces local temperature differences, and improves product consistency.
- Does it support automatic program operation?
Supports 50-segment automatic program control, enabling automatic heating, holding, and cooling operation.
- Can it automatically control the air intake flow?
Support. The equipment can automatically adjust the air intake flow by time period via the touch screen and record data in real time.
- Does it support customization?
Customization of furnace size, atmosphere system, automation control, and testing functions is supported according to customer needs.
