Luoyang Anjing Intelligence Equipment es líder mundial en hornos eléctricos de alta temperatura
1600°C High-Temperature Elevator Furnace with Dual Loading Platforms
PARÁMETROS DEL PRODUCTO
Descripción
1600°C High-Temperature Elevator Furnace with Dual Loading Platforms
This 1,600°C high-temperature elevator furnace features a dual-platform alternating operation design, enabling simultaneous loading, sinterización, and unloading to minimize idle time and maximize equipment utilization. The system is equipped with a dual-loop SCR power control system, a Type B thermocouple temperature measurement system, and an intelligent PLC control platform with a touchscreen interface.The dual-station automatic lifting design, combined with a highly efficient thermal insulation structure, meets the requirements for high-quality ceramic sintering, heat treatment of electronic materials, and high-temperature experimental applications.
Características del producto
- Dual-platform design for high-efficiency continuous production
Equipped with two loading platforms that can be used alternately at high temperatures. While one platform undergoes sintering inside the furnace chamber, the other can be loaded or unloaded externally, enabling continuous production. The movement of the platforms into and out of the furnace is driven by a variable-speed motor.
- Stepped interlocking seal for excellent sealing performance
The interface between the furnace opening and the charging platform employs a stepped, staggered sealing structure featuring angled refractory materials. The angle increases when the platform opens and narrows gradually as it closes, creating a self-locking seal.
- Three-layer insulation structure for over 80% energy savings
The insulation system employs a three-layer structure: 1350-grade high-alumina fiber blanket, domestic 1700-grade alumina fiber board, and imported 1800-grade fiber board, achieving an energy-saving improvement of over 80% compared to older electric furnaces. High-purity, lightweight, specially shaped alumina materials are used at the furnace opening—an area prone to impact—to ensure greater durability. The furnace lining consists of vacuum-formed, high-purity alumina fiber lightweight boards, while the furnace floor uses high-purity, lightweight hollow-sphere alumina boards, offering excellent insulation and reliable load-bearing capacity.
- Dual-loop SCR control for precision and stability
The system employs dual-loop closed-loop control technology to trigger the SCR modules using a phase-shift triggering method. It offers continuously adjustable output voltage, actual, or power, with constant voltage, constant current, or constant power capabilities. The dual-loop design ensures that if one loop fails, the other continues to operate, thereby guaranteeing production continuity.
| Temperature Category | 1600℃ |
| Presupuesto (Dimensiones de la cámara) | 500×500×500 mm, Exterior Dimensions 2180×1200×1200 mm |
| Poder de diseño | Automatically adjustable according to heating rate, también ajustable manualmente; Max power 40KW |
| Power Supply | Three-phase five-wire 380V AC |
| Temperatura de funcionamiento a largo plazo | 1600℃ (surface temperature) |
| Temperature Sensor | Type B thermocouple, measuring range 0-1820℃ |
| Heating Element Location | Surrounding |
| Precisión del control de temperatura | ±1℃ (control de circuito integrado, sin sobrepasar) |
| Temperature Uniformity | ±3℃ |
| Debinding Port | 60mm |
| Tasa de calentamiento | Libremente ajustable: max. 20℃/min, min. 1℃/h |
| Heating Elements | U-shaped 1800-type MoSi₂ rods |
| Cuerpo del horno | mecanizado por CNC, pulido, sanded, acid-washed, fosfatado, powder-coated, and baked. Two-tone color scheme, oxidation-resistant, acid/alkali resistant, corrosion resistant, high temperature resistant, fácil de limpiar. Export quality, mirror baking finish |
| Estructura del horno | Air-cooled double-layer structure with effective air-cooling guide baffles for overall cold air circulation, cooling the heating element conductive plates before exhausting, preventing high-temperature oxidation |
| Furnace Movement Method | Stepless geared motor for entry/exit, speed adjustable |
| Furnace Lifting | Loading platform lifting using screw lift, screw located at rear to avoid high temperature, higher precision |
| Furnace Opening and Platform Sealing | Step cross sealing. Refractory materials have angled surfaces; El ángulo de apertura de la plataforma aumenta y disminuye gradualmente a medida que se cierra la plataforma. |
| Loading Platform Load Capacity | 200kilos |
| Material refractario | Lining made of vacuum-formed high-purity alumina fiber lightweight board; high-wear areas (furnace bottom) use high-purity lightweight hollow ball alumina plates, resistant to thermal shock, no cracking, no spalling, ahorro de energía >80% |
| Material aislante | Three-layer insulation: 1350 high-alumina fiber cotton, domestic 1700 alumina fiber board, imported 1800 fiber board, ahorro de energía >80%; furnace opening high-wear areas use alumina lightweight special-shaped high-purity material |
| Furnace Exterior Surface Temperature | During continuous long-term operation, exterior temperature <45℃ |
| Protection Features | Integrated module control unit with dual-loop control and dual-loop protection, including protection against overshoot, undershoot, segment loss, pérdida de fase, sobretensión, sobrecorriente, sobre temperatura, comentarios actuales, and soft start |
| Dual Control | Two sets of closed-loop thyristor module trigger control, activación por cambio de fase, continuous adjustment of output voltage, current or power, featuring constant voltage, constant current or constant power characteristics |
| Temperature Curve Programming | Intelligent temperature controller supporting PID, APID, MPT, and other adjustment modes, auto-tuning, self-learning, 50-segment programmable control, supports jump, cycle, run, pause, stop commands, and curve fitting |
| Multi-profile Input | 30-segment programmable control, touchscreen display |
Áreas de aplicación
- Ultra-high-temperature ceramic sintering: Suitable for the high-quality sintering of ultra-high-temperature ceramic materials such as alumina, zirconia, silicon nitride, and silicon carbide.
- Hard alloy heat treatment: Suitable for the high-temperature sintering and heat treatment of refractory metal materials, including tungsten carbide-based hard alloys and titanium alloys.
- Specialized materials R&D: Suitable for research into the synthesis and heat treatment processes of new materials, such as specialty ceramics, superalloys, and composite materials.
- Electronic ceramics: Suitable for the high-temperature sintering of functional electronic ceramics, including piezoelectric ceramics, cerámica dieléctrica, and magnetic materials.
- Powder metallurgy: Suitable for the ultra-high-temperature sintering and forming of metal and alloy powders.
Perfil de la empresa
Una empresa profesional especializada en servicios de tecnología de tratamiento térmico y R.&D, fabricación, y venta de hornos eléctricos de alta temperatura.
La empresa se centra en el desarrollo de hornos eléctricos de alta temperatura que cubren un rango completo de temperatura de -100 ℃ a 2600 ℃.. Entre sus productos se encuentran hornos eléctricos experimentales., hornos de atmósfera de vacío, hornos industriales, y equipos de calentamiento por inducción de media frecuencia. Los principales productos incluyen hornos de caja., hornos tubulares, hornos elevadores, hornos de empuje, hornos de bogie, hornos rotativos, hornos de túnel, y varios hornos especializados de media frecuencia.
La empresa se adhiere a la innovación tecnológica y ha aprobado las certificaciones ISO9001 y CE de la UE.. posee 21 marcas registradas, 29 patentes, y 27 derechos de autor del software.
Métodos de pago
TT
Métodos de envío
El horno eléctrico está empaquetado en tres capas.: primero envuelto en papel de espuma, luego envuelto en película plástica, y finalmente embalado en una caja de madera..
Preguntas frecuentes (Preguntas frecuentes)
- What are the advantages of the dual-platform structure?
The dual-station design allows for simultaneous sintering and loading/unloading, significantly enhancing equipment utilization and production efficiency.
- How uniform is the furnace temperature?
Standard temperature uniformity reaches ±3°C, meeting the requirements for high-end ceramic sintering.
- What is the load capacity of the loading platform?
The standard design supports a load of 200 kg; higher load capacities can be customized based on process requirements.
- Does it support complex process profiles?
It supports 30-segment programmed temperature control and features PID/APID intelligent control algorithms.
- Is non-standard customization available?
Sí, we offer personalized customization services for furnace dimensions, temperature ratings, load capacities, automation levels, and more.
