Luoyang Anjing Intelligence Equipment es líder mundial en hornos eléctricos de alta temperatura
1000℃ Large Multi-Zone Rotary Kiln for Continuous Silica Slurry Drying & Calcination
PARÁMETROS DEL PRODUCTO
Descripción
1000℃ 40-meter Large-scale Multi-section Rotary Furnace Production Line
This 1000℃ large-scale multi-section rotary kiln furnace production line adopts an integrated design for drying, calcination, tail gas purification, and cooling recovery. With a total length of approximately 40 meters, the system integrates a drying furnace, calcination furnace, tail gas purification furnace, cooling section, waste heat recovery system, automatic feeding system, and intelligent PLC control platform, achieving fully automated operation from material feeding, drying, calcination, cooling to tail gas treatment. The entire set of equipment uses a Siemens PLC central control system, an industrial touch screen operating platform, and an ABB frequency converter drive system, enabling centralized monitoring and remote management of temperature, speed, flow rate, power consumption, and process parameters.
Product Features Rotary Kiln
- Multi-section structure, integrated process flow
This equipment is a large-scale multi-section rotary kiln, approximately 40 meters in length, consisting of a feeding section, a drying furnace (5 zones), a calcining furnace (5 zones), a tail gas purification furnace (4 zones), and a cooling section. It integrates drying, calcination, tail gas purification, and cooling, achieving continuous and automated production of material heat treatment processes.
- Large-diameter, long furnace tubes, outstanding processing capacity
The drying and calcining furnaces have furnace tubes with a diameter of 1030mm and a length of 6000mm. The cooling section also has a diameter of 1030mm and a length of 6000mm. This allows for large-scale, continuous industrial production with a large single-batch processing capacity.
- Independent zone heating, flexible process
The drying furnace has 5 heating systems, the calcining furnace has 5 heating systems, and the tail gas purification furnace has 4 heating systems. Each heating zone can be independently controlled. The control panel has a manual heating start knob, and the touchscreen allows engineers to manually operate each heating zone and flexibly adjust process parameters.
- Fully Automatic PLC Control, Remote Monitoring
Utilizing an S7-1500 series central CPU controller, the system implements sequential, conditional, timing, and counting control of the process electrical control equipment, PID adjustment, 485 communication, and Profinet interface control functions, as well as automatic accumulation and data processing of flow and energy parameters. It supports network topology and remote monitoring.
- Exhaust Gas Purification System, Environmentally Compliant
The exhaust gas purification furnace is equipped with four heating zones and four temperature control points, providing high-temperature purification of waste gas generated during drying and calcination, effectively removing harmful substances and meeting environmental emission requirements.
- Cooling and Waste Heat Recovery, Energy Efficient
The cooling section is equipped with two temperature measurement points: one at the waste heat recovery inlet and one at the outlet, as well as a water pressure gauge with electrical contacts. Except for the waste heat recovery motor, all other motors in the cooling section—feed motor, furnace tube rotary motor (two 4KW frequency converters), waste heat recovery motor (4KW frequency converter), and spray motor (2.2kilovatios)—use direct start control, achieving efficient cooling and waste heat recovery.
| Temperatura máxima | 1000°C |
| Continuous Operating Temperature | 900°C |
| Furnace Length | 40metro (multi-section structure) |
| Zones | 5 drying zones + 5 calcination zones + 4 purification zones |
| Temperature Sensors | 23 points (material temp, exhaust temp, outlet temp, heat recovery inlet temp, etc.) |
| Heating Elements | High-temperature alloy resistance wires with Mo content |
| Temperature Accuracy | ±1°C (control de circuito integrado, sin sobrepasar) |
| Tasa de calentamiento | Adjustable: up to 30°C/min fast heating, down to 1°C/h slow heating |
| Drive System | ABB motors: drying feed motor 4 kW, rotation motor 11 kW; calcination feed motor 4 kW, rotation motor 11 kW |
| Cooling Section | Equipped with heat recovery inlet, outlet temperature monitoring, spray cooling, and water pressure detection |
| Air/Gas Control | Calcination section with 3 gas inlet solenoid valves, adjustable flow |
| Control System | PLC + Touchscreen HMI, Profinet & RS485 communication, PID regulation, multi-curve programming |
| Protection Features | Dual-loop control & protection: over-temp, over-voltage, pérdida de fase, arranque suave, comentarios actuales, interlock safety |
| Power Supply | 3-phase 5-wire, 400 VAC, 50 Hz, main breaker 2500 A |
| Feed Method | Continuous screw feeding, adjustable tilt angle |
| Packaging | Industrial-grade, wooden crate export packaging |
Application Areas Rotary Kiln
- Continuous Production of Battery Materials: Suitable for the continuous production of precursors for lithium-ion battery cathode materials (lithium iron phosphate, ternary materials, etc.), including drying and calcination. A 40-meter-long furnace enables a continuous process from feed to finished product.
- Catalyst Calcination: Suitable for the continuous drying, calcination, and activation of catalyst supports, molecular sieves, and other materials. Multi-stage temperature control meets complex temperature profile requirements, and a tail gas purification system ensures environmental compliance.
- Metal Oxide Reduction: Suitable for the continuous reduction of metal oxides such as iron oxide, copper oxide, and tungsten oxide to prepare high-purity metal powders.
- Chemical Raw Material Calcination and Decomposition: Suitable for the continuous calcination and decomposition of chemical raw materials such as carbonates and hydroxides. High capacity and efficiency, suitable for large-scale industrial production.
- Mineral Roasting: Suitable for mineral pretreatment processes such as spodumene roasting, iron ore magnetization roasting, and rare earth mineral decomposition. Multi-point temperature control and adjustable atmosphere meet the roasting requirements of different minerals.
- Solid waste pyrolysis treatment: Suitable for the pyrolysis, incineration, and harmless treatment of industrial solid waste, sludge, and hazardous waste. The large-diameter furnace tubes and long furnace body design are suitable for large-scale continuous processing.
- Waste heat recovery and energy-saving production: The waste heat recovery system in the cooling section can recover and utilize the heat from high-temperature materials, preheating incoming materials or using it for other processes, significantly reducing energy consumption.
Perfil de la empresa
Una empresa profesional especializada en servicios de tecnología de tratamiento térmico y R.&D, fabricación, y venta de hornos eléctricos de alta temperatura.
La empresa se centra en el desarrollo de hornos eléctricos de alta temperatura que cubren un rango completo de temperatura de -100 ℃ a 2600 ℃.. Entre sus productos se encuentran hornos eléctricos experimentales., hornos de atmósfera de vacío, hornos industriales, y equipos de calentamiento por inducción de media frecuencia. Los principales productos incluyen hornos de caja., hornos tubulares, hornos elevadores, hornos de empuje, hornos de bogie, hornos rotativos, hornos de túnel, y varios hornos especializados de media frecuencia.
La empresa se adhiere a la innovación tecnológica y ha aprobado las certificaciones ISO9001 y CE de la UE.. posee 21 marcas registradas, 29 patentes, y 27 derechos de autor del software.
Métodos de pago
TT
Métodos de envío
El horno eléctrico está empaquetado en tres capas.: primero envuelto en papel de espuma, luego envuelto en película plástica, y finalmente embalado en una caja de madera..
Rotary Kiln Frequently Asked Questions (Preguntas frecuentes)
- Can it achieve continuous production?
Sí. This equipment adopts a 40-meter multi-segment continuous rotary structure, suitable for 24-hour continuous operation.
- How accurate is the temperature control?
It adopts multi-zone independent PID control, with each temperature zone independently adjustable, achieving stable and precise temperature control.
- Does it support atmosphere protection processes?
Supported. The calcination section is equipped with a multi-intake system, enabling heat treatment processes under different atmosphere conditions.
- Can it be connected to the factory’s MES or DCS system?
Sí. The system supports RS485 and Profinet industrial communication protocols, and can interface with MES, DCS, and SCADA systems.
- Does it support remote monitoring?
Supported. The PLC system and touch screen enable remote data monitoring and process management.
