लुओयांग अंजिंग इंटेलिजेंस इक्विपमेंट उच्च तापमान वाली इलेक्ट्रिक भट्टियों में वैश्विक नेता हैं
High Temperature Furnace Refractory Repair Material
उत्पाद पैरामीटर
विवरण
High-Temperature Furnace Lining Repair Material
This fiber material repair material is a specialized repair material designed for ceramic fiber products. It is primarily used for repairing cracks, holes, and localized damage on the surface of high-temperature fiber products such as ceramic fiber boards and ceramic fiber furnace linings. This product uses high-quality refractory fibers as the main raw material, combined with a binder, and possesses excellent bonding properties, high-temperature resistance, and thermal stability. After repair, it bonds firmly to the substrate, and after curing, it exhibits high strength and does not crack, effectively extending the service life of the furnace lining and reducing replacement costs.
उत्पाद की विशेषताएँ
- Excellent High Temperature Resistance
Covering multiple temperature ranges from 1260℃ to 1750℃, it can be flexibly selected according to the actual operating temperature of the furnace.
- High Bonding Strength and Strong Bonding
After repair, it bonds tightly to the ceramic fiber matrix, achieving high strength after curing, and is not prone to peeling or cracking.
- Good Thermal Stability
Matching the coefficient of thermal expansion of ceramic fiber products, it does not peel or pulverize at high temperatures, resulting in a long service life.
- Simple Construction and Operation at Room Temperature
Simply add water and mix well on-site before use; no special construction equipment is required, making the operation simple and quick.
- Economical and Practical, Extending Furnace Life
Effectively repairs localized damage to the furnace, avoiding complete replacement and significantly reducing maintenance costs.
| Item | विवरण |
|---|---|
| Instructions | 1. Clean the area to be repaired 2. Mix the repair mortar with water (3~5 min) to a paste-like consistency, ratio approx. 1:1 3. Apply evenly and smooth the surface 4. After repair, heat at 1~3℃/min to 800~1000℃ for curing |
| Product Models | AJ-XK1260C: 1260℃ AJ-XK1420C: 1420℃ AJ-XK1600C: 1600℃ AJ-XK1800C: 1700~1750℃ |
अनुप्रयोग क्षेत्र
- Ceramic Fiber Board Repair: Used for repairing cracks, defects, and holes on the surface of ceramic fiber boards.
- Ceramic Fiber Furnace Repair: Used for localized repairs of the fiber furnace linings in high-temperature electric furnaces and experimental furnaces.
- Ceramic Fiber Module Repair: Used for repairing and reinforcing damaged fiber modules.
- Pipe Insulation Layer Repair: Used for localized repairs of ceramic fiber insulation layers in high-temperature pipelines.
कंपनी प्रोफाइल
ताप उपचार प्रौद्योगिकी सेवाओं और आर में विशेषज्ञता वाला एक पेशेवर उद्यम&डी, उत्पादन, और उच्च तापमान वाली विद्युत भट्टियों की बिक्री.
कंपनी -100℃ से 2600℃ की पूर्ण तापमान सीमा को कवर करने वाली उच्च तापमान वाली इलेक्ट्रिक भट्टियां विकसित करने पर ध्यान केंद्रित करती है।. इसके उत्पादों में प्रायोगिक विद्युत भट्टियाँ शामिल हैं, निर्वात वातावरण भट्टियाँ, औद्योगिक भट्टियाँ, और मध्यम-आवृत्ति प्रेरण हीटिंग उपकरण. मुख्य उत्पादों में बॉक्स फर्नेस शामिल हैं, ट्यूब भट्टियां, भट्टियां उठाना, ढकेलने वाली भट्टियाँ, बोगी भट्टियां, रोटरी भट्ठे, सुरंग भट्टियां, और विभिन्न विशिष्ट मध्यम-आवृत्ति भट्टियाँ.
कंपनी तकनीकी नवाचार का पालन करती है और ISO9001 और EU CE प्रमाणपत्र पारित कर चुकी है. इसका मालिक है 21 पंजीकृत ट्रेडमार्क, 29 पेटेंट, और 27 सॉफ़्टवेयर कॉपीराइट.
भुगतान के तरीके
टीटी
शिपमेंट के तरीके
The electric furnace is packaged in thThe electric furnace is packaged in three layers: पहले फोम पेपर में लपेटा गया, फिर प्लास्टिक की फिल्म में लपेटा गया, and finally packed in a wooden crat.
अक्सर पूछे जाने वाले प्रश्नों (अक्सर पूछे जाने वाले प्रश्न)
- How to choose the appropriate repair material model?
Select the model based on the operating temperature of the furnace or fiber products. The temperature resistance rating of the repair material model should not be lower than the operating temperature of the substrate being repaired. For example, if the operating temperature of fiberboard is 1400℃, XK1420C or a higher rating should be selected.
- What is the mixing ratio of the repair material?
Mix the repair material with water at approximately a 1:1 ratio and stir for 3-5 minutes until it reaches a mud-like consistency. The actual amount of water added can be slightly adjusted based on the application feel, aiming for easy application without dripping.
- Is special treatment required after repair?
After repair, the temperature needs to be slowly increased to 800-1000℃ at a rate of 1-3℃/min for curing. Normal use is possible after curing. If the repaired area is small, it can be naturally cured during the normal heating process of the equipment, but it is recommended to appropriately slow down the heating rate when initially heating to the operating temperature.
- Will the repair affect the furnace insulation effect?
नहीं. The repair material is similar in material to the ceramic fiber matrix, and its thermal conductivity matches that of the matrix after curing, thus not affecting the overall insulation performance.
- How to store the product?
Store in a cool, dry place, protected from moisture. If the product becomes damp and clumps, it is not recommended to use it, as this will affect the repair effect.
