Luoyang Anjing Intelligence Equipment는 고온 전기로 분야의 글로벌 리더입니다.
High Temperature Furnace Refractory Repair Material
제품 매개변수
설명
High-Temperature Furnace Lining Repair Material
This fiber material repair material is a specialized repair material designed for ceramic fiber products. It is primarily used for repairing cracks, holes, and localized damage on the surface of high-temperature fiber products such as ceramic fiber boards and ceramic fiber furnace linings. This product uses high-quality refractory fibers as the main raw material, combined with a binder, and possesses excellent bonding properties, high-temperature resistance, and thermal stability. After repair, it bonds firmly to the substrate, and after curing, it exhibits high strength and does not crack, effectively extending the service life of the furnace lining and reducing replacement costs.
제품특징
- Excellent High Temperature Resistance
Covering multiple temperature ranges from 1260℃ to 1750℃, it can be flexibly selected according to the actual operating temperature of the furnace.
- High Bonding Strength and Strong Bonding
After repair, it bonds tightly to the ceramic fiber matrix, achieving high strength after curing, and is not prone to peeling or cracking.
- Good Thermal Stability
Matching the coefficient of thermal expansion of ceramic fiber products, it does not peel or pulverize at high temperatures, resulting in a long service life.
- Simple Construction and Operation at Room Temperature
Simply add water and mix well on-site before use; no special construction equipment is required, making the operation simple and quick.
- Economical and Practical, Extending Furnace Life
Effectively repairs localized damage to the furnace, avoiding complete replacement and significantly reducing maintenance costs.
| 목 | 설명 |
|---|---|
| Instructions | 1. Clean the area to be repaired 2. Mix the repair mortar with water (3~5 min) to a paste-like consistency, ratio approx. 1:1 3. Apply evenly and smooth the surface 4. After repair, heat at 1~3℃/min to 800~1000℃ for curing |
| Product Models | AJ-XK1260C: 1260℃ AJ-XK1420C: 1420℃ AJ-XK1600C: 1600℃ AJ-XK1800C: 1700~1750℃ |
응용분야
- Ceramic Fiber Board Repair: Used for repairing cracks, defects, and holes on the surface of ceramic fiber boards.
- Ceramic Fiber Furnace Repair: Used for localized repairs of the fiber furnace linings in high-temperature electric furnaces and experimental furnaces.
- Ceramic Fiber Module Repair: Used for repairing and reinforcing damaged fiber modules.
- Pipe Insulation Layer Repair: Used for localized repairs of ceramic fiber insulation layers in high-temperature pipelines.
회사 프로필
열처리 기술 서비스 및 R 전문 기업&디, 조작, 고온전기로 판매 및 판매.
-100℃ ~ 2600℃의 전온도 범위를 커버하는 고온 전기로 개발에 주력하고 있습니다.. 해당 제품에는 실험용 전기로가 포함됩니다., 진공 분위기 용광로, 산업 가마, 및 중주파 유도 가열 장비. 주요 제품으로는 상자로(Box Furnace)가 있습니다., 튜브 용광로, 리프팅 용광로, 푸셔 가마, 보기 용광로, 회전식 가마, 터널 가마, 다양한 전문 중주파로.
회사는 기술 혁신을 고수하고 ISO9001 및 EU CE 인증을 통과했습니다.. 그것은 소유 21 등록상표, 29 특허, 그리고 27 소프트웨어 저작권.
결제 방법
TT
배송 방법
전기로는 3단으로 포장되어 있습니다.전기로는 3겹으로 포장되어 있습니다.: 먼저 발포 종이로 포장, 그런 다음 플라스틱 필름으로 싸서, 그리고 마침내 나무 상자에 포장되었습니다..
자주 묻는 질문 (FAQ)
- How to choose the appropriate repair material model?
Select the model based on the operating temperature of the furnace or fiber products. The temperature resistance rating of the repair material model should not be lower than the operating temperature of the substrate being repaired. 예를 들어, if the operating temperature of fiberboard is 1400℃, XK1420C or a higher rating should be selected.
- What is the mixing ratio of the repair material?
Mix the repair material with water at approximately a 1:1 ratio and stir for 3-5 minutes until it reaches a mud-like consistency. The actual amount of water added can be slightly adjusted based on the application feel, aiming for easy application without dripping.
- Is special treatment required after repair?
After repair, the temperature needs to be slowly increased to 800-1000℃ at a rate of 1-3℃/min for curing. Normal use is possible after curing. If the repaired area is small, it can be naturally cured during the normal heating process of the equipment, but it is recommended to appropriately slow down the heating rate when initially heating to the operating temperature.
- Will the repair affect the furnace insulation effect?
아니요. The repair material is similar in material to the ceramic fiber matrix, and its thermal conductivity matches that of the matrix after curing, thus not affecting the overall insulation performance.
- How to store the product?
Store in a cool, dry place, protected from moisture. If the product becomes damp and clumps, it is not recommended to use it, as this will affect the repair effect.
