Luoyang Anjing Intelligence Equipment는 고온 전기로 분야의 글로벌 리더입니다.
Quartz Glass Tube for 1200°C Small Tube Furnace
제품 매개변수
설명
1200°C Small-Scale Tube Furnace with Quartz Glass Tube
This 1200°C compact tube furnace utilizes a high-purity quartz tube and features independent dual-zone temperature control, a vacuum system, multi-channel atmosphere control, and automatic rotation and tilting capabilities; it is suitable for high-temperature sintering, 열처리, and materials research and development.
The equipment employs a 7-inch touchscreen and Siemens PLC control, supports 30-segment programmed heating and cooling, allows for the introduction of gases such as nitrogen, 아르곤, and oxygen, and supports both vacuum and slight positive-pressure sintering.
제품특징
- Dual-configuration quartz glass furnace tubes (standard and specially shaped); supports both vacuum and controlled-atmosphere sintering
Equipped with one high-purity quartz tube (D150×600mm) and one specially shaped quartz tube (80mm diameter at ends, 150mm in the middle) designed specifically for vacuum and gas-flow sintering. The sealing flanges for the shaped tube are made of stainless steel and feature two gas inlets, one gas outlet, and one vacuum port, meeting the requirements for vacuum and various atmosphere sintering processes.
- Mechanical bearing-driven rotation and electric tilting for uniform material heating
The furnace tube utilizes a mechanical bearing drive system for automatic rotation at an adjustable speed of 0–5 rpm. The tilt angle is electrically adjustable from 0° to 15°. The combination of rotation and tilting ensures continuous material tumbling and uniform heating, making it ideal for the consistent sintering of powder materials.
- Independent temperature control for dual zones; adjustable constant-temperature zone length
Features two independently controlled temperature zones, allowing the length of the constant-temperature zone to be adjusted to meet process requirements. Temperature control accuracy is ±1°C, and furnace temperature uniformity is ±3°C (depending on heating chamber dimensions); S-type thermocouples provide a measurement range of 0–1600°C.
- Dual Sevenstar mass flow controllers; compatible with multiple gases
Equipped with two Sevenstar mass flow controllers (0–5 L/min) compatible with gases such as nitrogen, 아르곤, and oxygen. Precise control of the two gas inlets enables sintering under various atmospheric conditions.
- Digital vacuum gauge and two-stage vacuum pump; controllable slight positive pressure
Equipped with a direct-drive two-stage vacuum pump (2 L/S) and a digital vacuum gauge (-100 to 100 kPa). The system supports not only vacuum operation but also sintering under slight positive pressure, meeting the specific pressure environment requirements of specialized materials.
6. Magnetic fluid sealed rotary joint for reliable sealing
The flanges at both ends of the intermittent sintering furnace tube are made of 316L stainless steel, and the rotary joint utilizes a magnetic fluid seal, ensuring excellent vacuum/atmosphere sealing performance even while the tube is rotating. It is equipped with a PTFE (Teflon) feeding pusher to facilitate material loading.
- 7-inch touchscreen + Siemens PLC with 30-segment program control
Centralized control is provided via a 7-inch touchscreen and Siemens PLC, allowing for the configuration of heating profiles for each segment and the simultaneous control of two gas lines. The system features 30-segment program control, enabling precise heating and cooling rate adjustments, as well as programmable commands such as jump (looping), 달리다, 정지시키다, 그리고 멈춰라.
| 온도 | 1400℃ |
| Voltage AC | 380V/8KW |
| Temperature Control Accuracy | ±1℃ |
| Furnace Tube Material | High-purity quartz tube D150*600mm; 1 special-shaped quartz tube for vacuum extraction and gas sintering, with both ends 80mm in diameter and the middle 150mm in diameter. |
| Heating Zone | 600mm |
| Temperature Control | Ensure constant temperature zone length; 2 temperature control zones, each independently controllable. |
| Rotation | Mechanical bearing transmission, automatic rotation. |
| Rotation Speed | Adjustable from 0-5 r/min |
| Furnace Tube Tilt Angle | Electric tilt 0-15 degrees |
| 터치스크린 | 7-inch touch screen centralized control (via Siemens PLC on the touch screen, each heating program segment can be set and controlled, 2 gas lines). |
| Sealing Flange and Valves | 1. Special-shaped tube sealing flange made of stainless steel; 2 gas inlets + 1 gas outlet + 1 vacuum port. |
| Feeding | Equipped with PTFE feeding push rod. |
| Rotary Joints at Both Ends | Both-end flanges of the intermittent sintering furnace tube use 316L stainless steel; rotary joints use magnetic fluid sealing. |
| Vacuum Pump | Direct-coupled two-stage vacuum pump, 2L/S |
| Vacuum Gauge | Digital vacuum gauge, -100 to 100Kpa (capable of controlling micro-positive-pressure sintering processes). |
| Usable Gases | Nitrogen, 아르곤, oxygen, 등. |
| Gas Inlets | 2 lines |
| Flow Meters | 2 Seven-Star mass flow meters (0-5L/min) |
| Temperature Control Accuracy | ±1 degree (integrated circuit control, no overshoot phenomenon). |
| Temperature Field Uniformity in Furnace | ±3℃ (depending on the size of the heating chamber). |
| Temperature Measuring Element and Range | Thermocouple graduation S, measuring range 0-1600 degrees. |
| 가열 속도 | Adjustable from 1℃/h to 10℃/min |
| 발열체 | Imported Kanthal A-1 resistance wire. |
| Multi-Curve Input | 30-segment program control function; input settings: one curve as 30 세그먼트, two curves as 14 segments/curve, three curves as 9 segments/curve, five curves as 5 segments/curve; multiple curves can be input simultaneously and called up arbitrarily during use. |
| Temperature Curve Setting | Adopts intelligent temperature controller, equipped with standard PID, artificial intelligence adjustment APID or MPT and other adjustment modes; has self-tuning and self-learning functions; excellent control characteristics with no overshoot or undershoot; has 30-segment program control function, can realize heating and cooling control at any slope; has programmable/operable commands such as jump (cycle), 달리다, pause and stop, and allows program modification at any time during program-controlled operation; adopts artificial intelligence adjustment algorithm with curve fitting function, can obtain smooth and flat curve control effect. |
| Protection | Adopts integrated modular control unit with accurate control precision, and designs dual-loop control and dual-loop protection; equipped with protection against overshoot, overshoot, 미달하다, broken thermocouple, 위상 손실, 과전압, 과전류, 온도 이상, 현재 피드백, 소프트 스타트, 등. |
| Control | Adopts closed-loop technology thyristor module trigger control, phase-shift trigger control or zero-crossing trigger mode; output voltage, current or power continuously adjustable; has constant voltage, constant current or constant power characteristics; current loop is inner loop, voltage loop is outer loop; when load is suddenly applied or load current exceeds the current limit value, the output current of the voltage regulator is limited within the rated current range to ensure normal operation of the output and voltage regulator; at the same time, the voltage loop also participates in regulation, so that the output current of the voltage regulator is limited within the rated current range, and the output current and voltage are maintained constant under the premise of sufficient adjustment margin; thereby protecting the heating element from impact of excessive current and voltage, achieving safe and reliable control effect and control precision. |
| Insulation Material | Adopts three-layer insulation, respectively: 1200 aluminum silicate fiberboard, 1400 alumina fiberboard, 1700 alumina (polycrystalline) fiberboard; energy-saving effect is more than 80% that of old-style electric furnaces. |
| 용광로 본체 | Tiltable; furnace body processed by CNC machine tools, through polishing, grinding, pickling, phosphating, plastic powder spraying, high-temperature baking, 등.; two-color matching, novel and beautiful appearance; has advantages of oxidation resistance, acid and alkali resistance, 내식성, 고온 저항, 쉬운 청소, 등. |
| Cooling Structure | Double-layer furnace shell, air cooling. |
| Furnace Body Temperature | ≤45 degrees |
| Warranty Scope and Period | Electric furnace free warranty for one year; heating elements and furnace tube not covered by warranty (heating elements naturally damaged within three months will be replaced free of charge). |
응용분야
- Vacuum/Atmosphere Sintering of Powder Materials: Suitable for the sintering of various powder materials under vacuum or protective atmospheres.
- Heat Treatment of Battery Materials: Suitable for the sintering and heat treatment of battery materials—such as lithium battery cathode/anode materials and solid-state electrolytes—under protective atmospheres like nitrogen or argon.
- Nanomaterial Preparation: Suitable for the atmosphere heat treatment and sintering of novel materials, including carbon nanotubes and nanopowders.
- Ceramic Material Sintering: Suitable for sintering processes involving ceramic materials such as alumina and zirconia in controlled atmospheres.
- 아르 자형&D of New Materials: Suitable for research into atmosphere sintering processes for advanced materials, composites, and other novel materials.
회사 프로필
열처리 기술 서비스 및 R 전문 기업&디, 조작, 고온전기로 판매 및 판매.
-100℃ ~ 2600℃의 전온도 범위를 커버하는 고온 전기로 개발에 주력하고 있습니다.. 해당 제품에는 실험용 전기로가 포함됩니다., 진공 분위기 용광로, 산업 가마, 및 중주파 유도 가열 장비. 주요 제품으로는 상자로(Box Furnace)가 있습니다., 튜브 용광로, 리프팅 용광로, 푸셔 가마, 보기 용광로, 회전식 가마, 터널 가마, 다양한 전문 중주파로.
회사는 기술 혁신을 고수하고 ISO9001 및 EU CE 인증을 통과했습니다.. 그것은 소유 21 등록상표, 29 특허, 그리고 27 소프트웨어 저작권.
결제 방법
TT
배송 방법
전기로는 3겹으로 포장되어 있습니다.: 먼저 발포 종이로 포장, 그런 다음 플라스틱 필름으로 싸서, 그리고 마침내 나무 상자에 포장되었습니다..
자주 묻는 질문 (FAQ)
- What type of furnace tube is used in this 1200°C tube furnace?
The equipment utilizes a high-purity quartz tube with standard dimensions of D150 × 600 mm. It also comes with a specially designed quartz tube for vacuuming, gas purging, and high-temperature sintering experiments.
- What gases can be introduced into the tube furnace?
The system supports the introduction of gases such as nitrogen, 아르곤, and oxygen. It is equipped with two gas inlets and two 0–5 L/min Sevenstar mass flow controllers for precise gas flow regulation.
- Does this tube furnace support vacuum sintering?
예. The unit is equipped with a direct-drive dual-stage vacuum pump (pumping speed: 2 L/s) and a digital vacuum gauge, enabling both vacuum and slight positive-pressure sintering experiments.
- Can the furnace tube rotate and tilt?
예. The furnace tube is driven by mechanical bearings and rotates automatically, with an adjustable speed of 0–5 rpm. The furnace body can also be tilted electrically (0° to 15°), allowing for both rotary and tilting sintering experiments.
- Can multi-stage temperature programs be set for the tube furnace?
예. The equipment utilizes a 7-inch touchscreen and a Siemens PLC control system. It supports 30-stage program control—allowing users to configure heating, 보유, and cooling curves—as well as functions such as dual-gas control, program looping, pausing, and stopping.
