High Temperature Furnace Refractory Repair Material

High-Temperature Furnace Lining Repair Material

This fiber material repair material is a specialized repair material designed for ceramic fiber products. It is primarily used for repairing cracks, holes, and localized damage on the surface of high-temperature fiber products such as ceramic fiber boards and ceramic fiber furnace linings. This product uses high-quality refractory fibers as the main raw material, combined with a binder, and possesses excellent bonding properties, high-temperature resistance, and thermal stability. After repair, it bonds firmly to the substrate, and after curing, it exhibits high strength and does not crack, effectively extending the service life of the furnace lining and reducing replacement costs.

Produit Fonctiounen

1. Excellent High Temperature Resistance

Covering multiple temperature ranges from 1260℃ to 1750℃, it can be flexibly selected according to the actual operating temperature of the furnace.

2. High Bonding Strength and Strong Bonding

After repair, it bonds tightly to the ceramic fiber matrix, achieving high strength after curing, and is not prone to peeling or cracking.

3. Good Thermal Stability

Matching the coefficient of thermal expansion of ceramic fiber products, it does not peel or pulverize at high temperatures, resulting in a long service life.

4. Simple Construction and Operation at Room Temperature

Simply add water and mix well on-site before use; no special construction equipment is required, making the operation simple and quick.

5. Economical and Practical, Extending Furnace Life

Effectively repairs localized damage to the furnace, avoiding complete replacement and significantly reducing maintenance costs.

Applikatioun Beräicher

• Ceramic Fiber Board Repair: Used for repairing cracks, defects, and holes on the surface of ceramic fiber boards.
• Ceramic Fiber Furnace Repair: Used for localized repairs of the fiber furnace linings in high-temperature electric furnaces and experimental furnaces.
• Ceramic Fiber Module Repair: Used for repairing and reinforcing damaged fiber modules.
• Pipe Insulation Layer Repair: Used for localized repairs of ceramic fiber insulation layers in high-temperature pipelines.

Firma Profil

Eng professionell Entreprise spezialiséiert op Wärmebehandlungstechnologie Servicer an de R&D, Fabrikatioun, a Verkaf vun héich-Temperatur elektresch Schmelzhäre.

D'Firma konzentréiert sech op d'Entwécklung vun héijen Temperaturen elektreschen Uewen, déi e ganzt Temperaturberäich vun -100 ℃ bis 2600 ℃ decken. Seng Produkter enthalen experimentell elektresch Schmelzen, Vakuum Atmosphär Schmelzen, industriell Uewen, a Mëttelfrequenz Induktiounsheizungsausrüstung. Haaptprodukter enthalen Këschtofen, Rouer Uewen, Levée Schmelzen, pusher Uewen, bogie Uewen, Rotary Uewen, Tunnelofen, a verschidde spezialiséiert Mëttelfrequenz Uewen.

D'Firma hält technologesch Innovatioun an huet ISO9001 an EU CE Zertifizéierungen passéiert. Et gehéiert 21 registréiert Marken, 29 Patenter, an 27 Software Copyright.

Bezuelmethoden

TT

Versandmethoden

Den elektreschen Uewen ass an den elektreschen Uewen verpackt Den elektreschen Uewen ass an dräi Schichten verpackt: éischt a Schaumpapier gewéckelt, dann a Plastikfilm gewéckelt, a schlussendlech an engem hëlzene Krat gepackt.

Oft gestallte Froen (FAQ)

1. How to choose the appropriate repair material model?

Select the model based on the operating temperature of the furnace or fiber products. The temperature resistance rating of the repair material model should not be lower than the operating temperature of the substrate being repaired. Zum Beispill, if the operating temperature of fiberboard is 1400℃, XK1420C or a higher rating should be selected.

2. What is the mixing ratio of the repair material?

Mix the repair material with water at approximately a 1:1 ratio and stir for 3-5 minutes until it reaches a mud-like consistency. The actual amount of water added can be slightly adjusted based on the application feel, aiming for easy application without dripping.

3. Is special treatment required after repair?

After repair, the temperature needs to be slowly increased to 800-1000℃ at a rate of 1-3℃/min for curing. Normal use is possible after curing. If the repaired area is small, it can be naturally cured during the normal heating process of the equipment, but it is recommended to appropriately slow down the heating rate when initially heating to the operating temperature.

4. Will the repair affect the furnace insulation effect?

Nee. The repair material is similar in material to the ceramic fiber matrix, and its thermal conductivity matches that of the matrix after curing, thus not affecting the overall insulation performance.

5. How to store the product?

Store in a cool, dry place, protected from moisture. If the product becomes damp and clumps, it is not recommended to use it, as this will affect the repair effect.