Peralatan Perisikan Luoyang Anjing ialah peneraju global dalam relau elektrik suhu tinggi
3T Hydraulic Tilting Medium Frequency Melting Furnace
PARAMETER PRODUK
Penerangan
3-Ton Remote-Controlled Medium-Frequency Induction Melting Furnace
The 3-ton remote-controlled medium-frequency induction melting furnace is a medium-frequency induction heating device suitable for melting cast iron, keluli tuang, keluli tahan karat, and non-ferrous metals.This equipment employs an intelligent remote control system, high-voltage medium-frequency power supply technology, and a steel shell furnace structure, resulting in fast melting speed, low energy consumption, stable operation, and ease of use. Configurations can be selected based on the company’s production capacity requirements, transformer capacity, and smelting process. It supports a “one-to-two” configuration for continuous smelting production.
Melting Furnace Product Features
- Ultra-high voltage design, significant energy saving
The KGPS-3T-8 and KGPS-3T-8G utilize high-pressure induction furnace technology, with a furnace voltage of 5400–5600V. A three-stage boost circuit reduces reactive current by 60%, penjimatan 200 kWh of electricity per ton of molten iron. The KGPS-3T-3 and KGPS-3T-5 use voltages of 2600V and 3600V respectively, saving 90–100 kWh of electricity per ton of molten iron.
- Patented integrated inductor technology, maintenance-free and low loss
An integrated inductor can be optionally installed to replace traditional reactors. Traditional reactors use hollow tube coils, resulting in small conductive area, high electrical losses, complex water circuits, and a high failure rate. The integrated inductor eliminates induced current throughout the entire unit, making operation safer, maintenance-free, and highly reliable.
- Intelligent Remote Control System, Stable and Reliable Operation
Utilizing our patented intelligent remote control technology, this system offers fast protection, durable thyristors, excellent start-up performance, stable operation, convenient operation, and simple debugging and maintenance. Remote control operation makes the smelting process more convenient and controllable.
- Large Copper Busbar Installation, Reduced Line Loss
The system uses large cross-sectional area copper busbars (100mm × 5-6mm) to reduce line resistance, minimize power loss, and improve overall machine efficiency.
- Furnace Leakage Early Warning System, Preventing Safety Accidents
Equipped with an inductive furnace leakage early warning system, this system monitors the furnace lining condition at all times and can provide early warning of molten steel leakage accidents, preventing major safety incidents.
- Electromagnetic Stirring Effect, Uniform Composition
The medium-frequency magnetic field generates a magnetic stirring effect on the molten metal, which is beneficial for the uniform distribution of alloy composition and slag flotation, improving metallurgical quality.
- Standard Configuration of One Electric Furnace and Two Furnaces, Pengeluaran Berterusan
The system comes standard with two furnaces, one for production use and the other as a backup. The furnace body includes a furnace lid, sensors, crucible, furnace support frame (for steel shell furnaces, this consists of a fixed support frame and a movable support frame), water distributor, etc. The furnace lid movement and furnace body tilting are achieved using mechanical or hydraulic devices.
| Component | Parameter | KGPS-3T-3 Remote MF Furnace | KGPS-3T-5 Remote MF Furnace | KGPS-3T-8 Remote MF Furnace | KGPS-3T-8G Remote MF Furnace |
| Power Cabinet | Rated Input Voltage | 700V, Induction Furnace Output Voltage: 2600V | 1000V, Induction Furnace Output Voltage: 3600V | 1000V, Induction Furnace Output Voltage: 5400V | |
| KK Thyristors | 8 pcs, 2000A/1800V | 12 pcs, 1500A/1800V | 12 pcs, 1800A/1800V | ||
| KP Thyristors | 6 pcs, 2000A/3000V | 6 pcs, 1500A/3000V | 6 pcs, 1800A/3000V | ||
| Air Circuit Breaker | 2500A, Motorized Type | 2500A, Motorized Type | |||
| Copper Busbar | 100mm × 5mm | 100mm × 6mm | |||
| Reactor | Copper Coil Tube Diameter: 20mm, 8 Turns | ||||
| Intelligent Remote Control System | Proprietary Core Technology, High Reliability, Easy Operation, Convenient Maintenance & Commissioning | ||||
| Badan Relau | Furnace Features | High-voltage induction furnace with voltage up to 2600V. Reactive current reduced by 60%. Saves approximately 100 kWh per ton of molten iron. | High-voltage induction furnace with voltage up to 3600V. Reactive current reduced by 40%. Saves approximately 100 kWh per ton of molten iron. | High-voltage induction furnace with voltage up to 5400V. Reactive current reduced by 60%. Saves approximately 200 kWh per ton of molten iron. | High-voltage induction furnace with voltage up to 5600V. Reactive current reduced by 60%. Saves approximately 200 kWh per ton of molten iron. Equipped with extra-large heat-resistant steel shell, durable construction and hydraulic tilting system with powerful lifting force. |
| Furnace Shell Size | Diameter 1.5m, Height 1.55m | Diameter 1.5m, Height 1.8m | Diameter 1.5m, Height 1.8m | Length 1.65m × Width 1.65m × Height 1.85m | |
| Induction Coil Inner Diameter | 980 mm | 950 mm | 950 mm | 950 mm | |
| Coil Turns | 18 Turns | 19 Turns | 31 Turns | 31 Turns | |
| Copper Coil Specification | 25 × 50 × 4 mm | 25 × 45 × 4 mm | 25 × 35 × 5 mm | 25 × 35 × 5 mm | |
| Capacitor Bank Cabinet | High-capacity capacitors (2000KF / 1200V, 20 pcs, Xin’anjiang Brand), reducing reactive current by 30% and saving approx. 15 kWh per ton of molten iron. | High-capacity capacitors (2000KF / 1600V, 18 pcs, Xin’anjiang Brand), reducing reactive current by 40% and saving approx. 15 kWh per ton of molten iron. | High-capacity capacitors (4000KF / 2300V, 19 pcs, Xin’anjiang Brand), reducing reactive current by 60% and saving approx. 25 kWh per ton of molten iron. | High-capacity capacitors (4000KF / 2300V, 19 pcs, Xin’anjiang Brand), reducing reactive current by 60% and saving approx. 25 kWh per ton of molten iron. | |
Melting Furnace Application Areas
- Cast Iron Smelting:Suitable for batch smelting of cast iron materials such as gray cast iron, ductile iron, and vermicular graphite cast iron; 3-ton furnace capacity.
- Steel Casting Production: Suitable for smelting and casting of carbon steel, keluli aloi, keluli tahan karat, and other steels.
- Non-ferrous Metal Smelting: Suitable for smelting non-ferrous metals such as copper, aluminium, and zinc. Electromagnetic stirring promotes uniform alloy composition, suitable for high-quality casting production.
- Metal Recycling Smelting: Suitable for remelting scrap steel, scrap iron, scrap copper, and other metal scrap. The extra-large furnace shell design facilitates charging and allows for 24-hour uninterrupted smelting.
- Small and Medium-Sized Foundry Enterprises: Suitable for small and medium-sized foundries with an annual output of hundreds to thousands of tons of castings. The equipment is small in size, ringan, portable, occupies less than 1 square meter, and is easy to install and operate.
Profil Syarikat
Sebuah perusahaan profesional yang mengkhusus dalam perkhidmatan teknologi rawatan haba dan R&D, pembuatan, dan penjualan relau elektrik suhu tinggi.
Syarikat memberi tumpuan kepada membangunkan relau elektrik suhu tinggi yang meliputi julat suhu penuh -100 ℃ hingga 2600 ℃. Produknya termasuk relau elektrik percubaan, relau suasana vakum, tanur industri, dan peralatan pemanasan aruhan frekuensi sederhana. Produk utama termasuk relau kotak, relau tiub, relau mengangkat, tanur penolak, relau bogie, tanur berputar, tanur terowong, dan pelbagai relau frekuensi sederhana khusus.
Syarikat itu mematuhi inovasi teknologi dan telah lulus pensijilan ISO9001 dan EU CE. Ia memiliki 21 tanda dagangan berdaftar, 29 paten, dan 27 hak cipta perisian.
Kaedah Pembayaran
TT
Kaedah Penghantaran
Relau elektrik dibungkus dalam tiga lapisan: pertama dibalut dengan kertas buih, kemudian dibalut dengan filem plastik, dan akhirnya dibungkus dalam peti kayu.
Melting Furnace Frequently Asked Questions (Soalan Lazim)
- Does the equipment support one melting furnace for two furnaces?
ya, it can be configured with two furnace bodies to achieve simultaneous melting and holding operation.
- Can a furnace leakage alarm system be configured?
ya, a furnace leakage early warning and monitoring device can be configured according to process requirements.
- What is the equipment cooling method?
It uses circulating water cooling. A closed-loop cooling system is recommended.
- Is the 3-ton medium-frequency furnace suitable for continuous production?
ya, it is suitable for continuous melting operations and can meet the long-term production needs of foundry enterprises.
- How to select the appropriate model?
The selection should be based on the melting materials, production cycle time, transformer capacity, and energy consumption requirements.3T-3, 3T-5, 3T-8, and 3T-8G correspond to different melting efficiencies and configuration schemes.
