Luoyang Anjing Intelligence Equipment는 고온 전기로 분야의 글로벌 리더입니다.
2100°C Atmosphere Vacuum Furnace
제품 매개변수
설명
2100℃ Atmosphere Vacuum Furnace
The 2100℃ vacuum atmosphere furnace is an ultra-high temperature vacuum atmosphere experimental device. It integrates a temperature control system, vacuum furnace chamber, vacuum pump system, gas path system, pressure protection system, gas flow control system, and positive and negative pressure detection system. The water-cooled unit and furnace body are designed separately. The furnace chamber uses a multi-layer metal reflective screen structure and high-purity tungsten strips as heating elements. It is specifically designed for ultra-high temperature atmosphere sintering, vacuum heat treatment, high-purity material experiments, and advanced material research and development.
제품특징 ( Atmosphere Vacuum Furnace)
- 2100℃ Ultra-High Temperature Heating with Tungsten Strips
This vacuum atmosphere furnace has a maximum operating temperature of 2100℃. It uses high-purity tungsten strips as heating elements, evenly distributed around the furnace chamber. Tungsten strips offer advantages such as high high-temperature strength, good oxidation resistance, and long service life, meeting the requirements of ultra-high temperature sintering and melting processes. Note: Nitrogen gas must not be introduced above 800℃.
- Multi-Layer Metal Reflector Screen for Thermal Insulation
The furnace chamber is constructed with 10 layers of reflectors: 3 layers of tungsten, 2 layers of molybdenum, 2 layers of 310S stainless steel, 그리고 3 layers of 304 스테인레스 스틸. The multi-layer reflector screen structure provides excellent thermal insulation, minimizes heat storage, and effectively prevents high-temperature heat loss.
- High-Temperature and High-Pressure Gas Protection to Prevent Evaporation
When the temperature exceeds 1600℃, the furnace pressure is maintained at 100-1000Pa by controlling the argon gas flow rate, effectively preventing evaporation of the heating element and high-temperature reflector, thus extending the equipment’s service life. Argon gas can be used as the atmosphere.
- High Vacuum and Positive Pressure Protection
A two-stage direct rotary vane vacuum pump + Roots pump is used, with a vacuum value of 0.1-1000Pa (pressure controllable). The furnace lining steel plate is 6-20mm thick, double-sided welded, and can withstand a positive pressure of 0.1MPa. A pressure protection system is equipped: a signal from an electrical contact pressure gauge or pressure sensor automatically closes the inlet valve and activates the exhaust valve and alarm, providing audible and visual alarms.
- 304 Stainless Steel Water-Cooled Double-Layer Furnace Body
The electric furnace body adopts a 304 stainless steel water-cooled double-layer structure, equipped with a 3P chiller (with compressor). The water-cooled parts are located around the outer shell. The furnace shell temperature remains below 45℃ during long-term operation without shutting down the furnace, ensuring safe and comfortable operation.
| 온도 | 2100℃ |
| Normal Operating Temperature | 2100℃ |
| High Temperature Working Condition | Above 1600℃, argon flow controls pressure at 100-1000Pa to prevent evaporation of heating elements and high-temperature radiation shields |
| Voltage AC | 380다섯 |
| Designed Power | 18KW |
| Chamber Dimensions (mm) | Depth × Width × Height: 300×160×160 (effective hot zone) |
| Temperature Control Accuracy | ±1℃ (integrated circuit control, no overshoot) |
| Control Range | 50 to 2100℃ |
| Furnace Temperature Uniformity | ±2℃ (챔버 크기에 따라 다름) |
| Temperature Measuring Element & Range | Thermocouple type C, measuring range 0-2300℃ |
| 가열 속도 | 자유롭게 조절 가능: max 20℃/min (non-linear), 분. 1℃/시간 |
| 발열체 | High purity tungsten strip (nitrogen prohibited above 800℃) |
| Heating Element Installation Location | Evenly distributed around the furnace chamber |
| 용광로 본체 | CNC 가공, 우아한, 지면, 절인, 인산염 처리된, 분말 코팅, 고온 구운. Novel appearance, oxidation/acid/alkali/corrosion/high temperature resistant, easy to clean |
| 로 본체 구조 | 304 stainless steel water-cooled double-layer structure |
| 문 열림 방법 | Side opening |
| Furnace Shell Temperature | <45℃ during long-term continuous operation |
| Water Cooling | 3P chiller (with compressor) |
| Water Cooling Location | Around the outer shell |
| Vacuum Pump | Two-stage direct rotary vane pump + Roots pump |
| Vacuum Level | 0.1-1000Pa (pressure controllable) |
| Pressure Resistance | Chamber steel plate 6-20mm thick, double-sided welding, positive pressure resistance 0.1MPa |
| Gas Circuit Valves | Imported stainless steel valves |
| Pressure Detection | One digital pressure gauge for positive and negative pressure indication |
| Gas Flow Meter | One argon mass flow meter for precise gas flow control |
| 배기구 | 1 electrically controlled exhaust port for vacuum release |
| Pressure Protection | Signal from electric contact pressure gauge or pressure sensor automatically closes solenoid intake valve, activates solenoid exhaust valve and alarm, audible/visual alarm buzzer |
| Compatible Atmosphere | Argon |
| Thermal Insulation | 10-layer radiation shields inside chamber: 3 tungsten, 2 몰리브덴, 2 310에스, 3 304 |
| Protection | 1. Integrated modular control unit, dual-loop control and protection: overshoot, over/under regulation, broken thermocouple, 위상 손실, 과전압, 과전류, 온도 이상, 현재 피드백, 소프트 스타트, 등. 2. Equipped with 5kw generator as backup emergency power supply to prevent power failure at high temperature, with automatic control circuit |
| Control | Closed-loop thyristor module trigger control, phase-shift triggering. Output continuously adjustable with constant voltage/constant current/constant power characteristics, protecting heating elements |
| 디스플레이 매개변수 | 온도, 세그먼트 번호, 세그먼트 시간, 남은 시간, output power %, 전압, 현재의, pressure, gas flow, 비어 있는, 등. |
| Temperature Curve Setting | Touch screen intelligent temperature controller |
| Multi-Curve Input | 50-segment temperature program control, Siemens PLC real-time control, automatic setting of temperature, 비어 있는, gas flow, 등. for any temperature segment |
응용분야 (Vacuum Furnace)
- Ultra-High Temperature Ceramic Sintering: Suitable for high-temperature vacuum or atmosphere sintering of ultra-high temperature ceramic materials such as silicon carbide, 질화규소, 질화알루미늄, and zirconium oxide to obtain high-density, high-performance ceramic products.
- Refractory Metal Processing: Suitable for high-temperature sintering, melting, and heat treatment processes of refractory metals such as tungsten, 몰리브덴, tantalum, and niobium.
- Aerospace Materials: Suitable for high-temperature vacuum sintering of key materials such as aerospace high-temperature alloys and ceramic matrix composites.
- New Material Development: Suitable for ultra-high temperature synthesis and heat treatment process research of new materials such as special ceramics, 복합 재료, high-temperature alloys, 나노재료.
- High-Purity Metal Preparation: Suitable for vacuum melting, purification, and heat treatment of high-purity metals.
- Hard Alloys: Suitable for high-temperature vacuum sintering of tungsten carbide-based hard alloys.
회사 프로필
열처리 기술 서비스 및 R 전문 기업&디, 조작, 고온전기로 판매 및 판매.
-100℃ ~ 2600℃의 전온도 범위를 커버하는 고온 전기로 개발에 주력하고 있습니다.. 해당 제품에는 실험용 전기로가 포함됩니다., 진공 분위기 용광로, 산업 가마, 및 중주파 유도 가열 장비. 주요 제품으로는 상자로(Box Furnace)가 있습니다., 튜브 용광로, 리프팅 용광로, 푸셔 가마, 보기 용광로, 회전식 가마, 터널 가마, 다양한 전문 중주파로.
회사는 기술 혁신을 고수하고 ISO9001 및 EU CE 인증을 통과했습니다.. 그것은 소유 21 등록상표, 29 특허, 그리고 27 소프트웨어 저작권.
결제 방법
TT
배송 방법
전기로는 3겹으로 포장되어 있습니다.: 먼저 발포 종이로 포장, 그런 다음 플라스틱 필름으로 싸서, 그리고 마침내 나무 상자에 포장되었습니다..
2100℃ Vacuum Atmosphere Furnace Frequently Asked Questions (FAQ)
- What is the highest temperature this equipment can reach?
The equipment can operate at a maximum temperature of 2100℃, suitable for ultra-high temperature experiments and sintering processes.
- What gases can be introduced?
The standard configuration supports an argon protective atmosphere. Due to the use of tungsten-coated heating elements, nitrogen is prohibited above 800℃.
- 달성할 수 있는 진공 수준?
The equipment’s vacuum range is 0.1-1000Pa, which can be precisely controlled according to process requirements.
- Does it support automated operation?
예. The equipment uses a PLC intelligent control system, which can automatically complete heating, cooling, atmosphere control, and pressure control.
- Is it safe for the furnace to operate at high temperatures for extended periods?
The equipment adopts a double-layer water-cooled structure and multiple safety protection systems. During long-term operation, the furnace shell temperature is ≤45℃.
