Luoyang Anjing Intelligence Equipment est un leader mondial des fours électriques à haute température
1000°C Tilting Electric Rotary Furnace A Three-Zone Continuous Calcination Furnace
PARAMÈTRES DU PRODUIT
Description
1000°C Tilting Electric Rotary Furnace
The 1000°C tilting electric rotary furnace is an automated, high-temperature system designed for the continuous drying, roasting, calcination, pyrolysis, and heat treatment of powder materials. It features an independent three-zone temperature control system, an intelligent PLC control unit, an adjustable tilting rotary mechanism, and an automatic spiral feeding system to ensure continuous material intake, uniform tumbling and heating, and automatic discharge. Equipped with a large-diameter (Φ300mm) rotary tube, an extra-long (4000mm) heating zone, electric tilt adjustment (0–30°), and a variable speed drive (0–5 rpm).
Caractéristiques du produit
- Adjustable Tilt Angle and Controlled Material Flow
The furnace body’s tilt angle is adjustable between 0° and 30°; combined with the furnace tube’s rotation speed (0–5 rpm), this allows for precise control over the material’s residence time and travel speed within the tube.
- Three Independent Temperature Zones with Precise Profile Control
The total heating zone length is 4000 mm, divided into three sections (1333 mm each), with independent temperature control for each zone. Chauffage, holding, and cooling profiles can be customized based on process requirements; materials pass sequentially through preheating, calcination, and cooling zones, enabling continuous, staged processing.
- 316L Stainless Steel Tube with Anti-Sticking Internal Flights
The furnace tube is constructed from 316L stainless steel (total length ≈ 6000 mm, diameter 300 mm) and is suitable for long-term operation at temperatures up to 800°C. Internal flights (made of the same material as the tube) are welded to the inner wall; as the tube rotates, these flights continuously lift and tumble the material to prevent it from sticking to the wall. Mechanical knockers are installed at both ends to periodically strike the tube’s exterior, further preventing material adhesion.
- Spiral Feeding System with Anti-Jamming Design
A spiral feeder is used for material input, offering adjustable feed rates to ensure continuous, uniform, and stable automatic feeding. An anti-jamming mechanism prevents blockages, ensuring the stability and continuity of the production process.
- Fully Functional Ends with Controlled Atmosphere Capabilities
The feed end features an inlet, an exhaust port, and a humidity monitoring port for real-time tracking of internal humidity levels. The discharge end is equipped with a dry gas inlet; the gas pipe extends into the tube and features a porous design to prevent the gas flow from blowing the material around. Both ends utilize a semi-sealed structure, enabling the maintenance of a slight positive pressure atmosphere within the tube to meet specific material requirements.
| Design Temperature | 1000℃ |
| Voltage | AC 380V±10% |
| Dimensions hors tout (L×W×H) | 6000×1500×1900 mm |
| Pouvoir | 70KW |
| Furnace Tube Diameter | 300mm (with material baffle plates welded inside, same material as tube; hammers at both ends to prevent material sticking) |
| Heating Zone | Three zones, each 1333mm, total length 4000mm, each zone with independent temperature control |
| Temperature Control Zones | Three |
| Furnace Tube Material | 316L Stainless Steel, total length ≈6000mm (suitable for temperatures below 800℃) |
| Feeding Method | Screw feeder with anti-jamming device |
| Furnace Cover Opening Method | Electric hydraulic pusher, easy maintenance |
| Temperature Sensor & Range | Nickel-Chromium/Nickel-Silicon (Type K), measuring range 0-1350℃ |
| Furnace Tube Ends | Inlet end: feed port, exhaust port, humidity detection port; Outlet end: discharge port, dry gas inlet (inlet tube extends into furnace tube with multiple holes to prevent material blowing). Semi-sealed design allows slight positive pressure inside tube. |
| Furnace Tube Rotation Speed | 0-5 rpm |
| Temperature Uniformity in Furnace | ±5℃ (depending on heating chamber size) |
| Précision du contrôle de la température | ±1 ℃ |
| Touchscreen Operation | 10″ true-color touchscreen with functions including heating settings, courbes historiques, data reports, alarm information, humidity display, power percentage, etc.. |
| Élément chauffant | High-temperature alloy resistance wire (Mo-containing) or silicon carbide rods |
| Heating Element Location | Installed around the furnace tube |
| Taux de chauffage | Freely adjustable, range: max. 15℃/min, min. 1℃/h |
| Furnace Tilt Angle | 0-30° adjustable |
| Corps du four | usiné CNC, brillant, sanded, acid-washed, phosphaté, powder-coated, and baked. Novel and aesthetic appearance with oxidation resistance, acid/alkali resistance, résistance à la corrosion, high temperature resistance, and easy cleaning. |
| Furnace Structure | Air-cooled double-layer structure with effective air-cooling guide baffles for overall cold air circulation, cooling the heating element conductive plates before exhausting, preventing high-temperature oxidation and ensuring a good working environment. |
| Matériau réfractaire | Lining made of vacuum-formed high-purity alumina lightweight material. High-wear areas (furnace port, bas) use lightweight hollow ball alumina plates. |
| Matériau isolant | Isolation à trois couches: aluminum silicate fiber board, alumina fiber board, alumine (polycristallin) fiber board. |
| Furnace Exterior Surface Temperature | During continuous long-term operation, exterior surface temperature = room temperature + 25℃ |
| Protection Features | Integrated module control unit with dual-loop control and dual-loop protection, including protection against overshoot, undershoot, segment loss, perte de phase, surtension, surintensité, surchauffe, commentaires actuels, et démarrage progressif. |
| Méthode de contrôle | Closed-loop technology with thyristor module trigger control, déclenchement par déphasage. Continuous adjustment of output voltage, actuel, or power. Features constant voltage, constant current, or constant power characteristics. |
| Paramètres d'affichage | Température, numéro de segment, temps de segment, temps restant, output power percentage, tension, actuel, etc.. |
| Temperature Control | 7″ true-color touchscreen with centralized control for three temperature zones. Features include historical temperature curves, data reports (recorded every 2 minutes), etc.. |
| Boutons | Premium push buttons with service life >100,000 cycles, avec indicateurs LED. |
| Temperature Curve Programming | Intelligent temperature controller supporting PID, APPID, MPT, and other adjustment modes. Features auto-tuning, self-learning, pas de dépassement/sous-dépassement. 30-segment programmable control with arbitrary ramp rates, supports jump, cycle, courir, pause, stop commands, and curve fitting. |
| Multi-profile Input | 30-segment programmable: configurable as 1 profile of 30 segments, 2 profiles of 14 segments each, 3 profiles of 9 segments each, or 5 profiles of 5 segments each. Multiple profiles can be stored and recalled as needed. |
| Exhaust Ports | Two upper exhaust ports (DN65mm with valves), one bottom tar discharge port (DN32mm) |
| Refroidissement rapide | Customized according to customer requirements |
| Warranty Scope & Period | Electric furnace: one-year free warranty. Heating elements and furnace tube are not covered (heating elements naturally damaged within three months are replaced or repaired free of charge). |
| Included Accessories | Instruction manual, certificate of conformity, pinces à creuset, one pair of high-temperature gloves, two sets of sealing rings. |
| Shipping Information | 1. Conditionnement: sponge paper + plastic film wrapping + iron frame base. 2. Free domestic delivery (within urban areas). 3. Any damage during transport is borne by the supplier. 4. Shipping method: truck, rail, sea (export), air (export); short-distance transport by company vehicle (wooden pallet + carton). |
| Control Section | |
| Main Rotation & Tilt Control | Touchscreen and Siemens PLC control |
| Operating Voltage | 24V |
| Power Supply Parameters | 3P AC380V / 50HZ + N + PE |
| Digital Temperature Controller | 858X series, 3 unités, 0-1300℃, PID continuous temperature control (with 485 communication interface) |
Domaines d'application
- Material Drying and Dehydration: Suitable for the continuous drying and dehydration of various powdered and granular materials.
- Material Calcination and Heat Treatment: Suitable for the continuous calcination and heat treatment of materials such as chemical raw materials, catalyst precursors, and inorganic salts. Three independent temperature zones allow for the separate configuration of preheating, calcination, and cooling temperature profiles to meet the specific calcination process requirements of different materials.
- Continuous Powder Material Production: Suitable for the continuous, large-scale production of various powder materials. A screw feeder enables automatic material feeding, while an inclined rotary structure facilitates continuous material intake and discharge.
- Laboratory and Pilot-Scale Research: Suitable for calcination process research and pilot-scale production in fields such as materials science, chemical engineering, and metallurgical engineering.
- Universities and Research Institutes: Suitable for experimental teaching and research projects in disciplines such as materials science and engineering, chemical engineering, and metallurgical engineering.
Profil de l'entreprise
Une entreprise professionnelle spécialisée dans les services de technologie de traitement thermique et le R&D, fabrication, et vente de fours électriques haute température.
La société se concentre sur le développement de fours électriques à haute température couvrant une plage de températures complète de -100 ℃ à 2 600 ℃.. Ses produits comprennent des fours électriques expérimentaux, fours à atmosphère sous vide, fours industriels, et équipements de chauffage par induction à moyenne fréquence. Les principaux produits comprennent des fours à caissons, fours tubulaires, fours de levage, fours pousseurs, fours à bogies, fours rotatifs, fours tunnel, et divers fours spécialisés moyenne fréquence.
L'entreprise adhère à l'innovation technologique et a passé les certifications ISO9001 et CE de l'UE.. Il possède 21 marques déposées, 29 brevets, et 27 droits d'auteur sur les logiciels.
Méthodes de paiement
TT
Méthodes d'expédition
Le four électrique est emballé en trois couches: d'abord enveloppé dans du papier mousse, puis enveloppé dans un film plastique, et enfin emballé dans une caisse en bois.
Foire aux questions (FAQ)
- What is the function of the furnace tilt angle?
Adjusting the tilt angle (0–30°) allows for control over material residence time and discharge speed, thereby optimizing process results.
- Why are material lifting flights installed in the furnace tube?
The lifting flights continuously turn the material, improving heating uniformity while reducing the risk of wall adhesion and agglomeration.
- Is operation under a protective atmosphere supported?
Oui. The equipment supports operation under slight positive pressure and allows for the introduction of process gases such as nitrogen or air.
- Can production data be recorded?
Oui. The system supports the storage of historical trend curves, data reports, and operation logs.
- What is the temperature control accuracy?
Utilizing intelligent PID control, the temperature control accuracy reaches ±1°C.
