Luoyang Anjing Intelligence Equipment er en global leder innen elektriske høytemperaturovner
Storskala heisovn med to plattformer
PRODUKTPARAMETRE
Beskrivelse
1450°C Dual-Station High-Temperature Elevator Furnace
This large-scale dual-platform elevator furnace is a high-end industrial electric furnace designed for high-temperature sintering, heat treatment, smelting, and materials R&D. It features an alternating dual-platform design that allows for loading and unloading at both stations when temperatures are below 500°C, thereby significantly boosting production efficiency, minimizing downtime, and reducing energy consumption.
The furnace utilizes a hybrid heating technology combining U-shaped high-purity silicon carbide rods and high-temperature resistance wires; it achieves a maximum temperature of 1450°C, with a stable long-term operating temperature of 1400°C. It is equipped with a PLC automatic control system, a touchscreen interface, multi-point independent temperature control, and RS485 remote communication capabilities.
Produktfunksjoner
- Alternating Dual-Platform System: Enhanced Efficiency and Reduced Energy Consumption
The equipment is equipped with two loading platforms that can be used alternately at high temperatures; while one platform undergoes sintering inside the furnace chamber, the other can be used for loading and unloading operations externally.
- PLC-Controlled Platforms with Centralized Touchscreen Operation
The charging platform and furnace body feature a modular design. Platform movements—such as entry/exit and lifting—are managed by a PLC system and centrally controlled via a touchscreen. Signal detection utilizes opto-isolated switches processed by the PLC, while operational commands are issued through the touchscreen.
- High Load Capacity for Industrial Batch Production
The loading platform supports a maximum load of 1,500 kg (customizable to client specifications), making it ideal for sintering heavy workpieces and large batches of material. It easily accommodates large ceramic products, refractory materials, and bulk metal components.
- Comprehensive Heating: Sides and Bottom
Heating elements are installed on the sides and bottom of the furnace chamber, creating an omnidirectional, three-dimensional heating field. The system employs a combination of U-shaped, constant-diameter silicon carbide rods (for the sides) and high-temperature alloy resistance wires (for the bottom).
- Stepped Interlocking Seal Design
The interface between the furnace opening and the platform’s refractory material utilizes a stepped interlocking structure with angled surfaces. The angle widens when the platform opens and gradually narrows as it closes, creating a self-locking sealing effect.
| Temperature Range | 1000-1700℃ |
| Antall lasteplattformer | Two, can be used alternately at high temperatures (below 500℃), improving efficiency and saving energy |
| Strømforsyning | Three-phase five-wire 380V AC |
| Maksimal driftstemperatur | 1450℃ |
| Langsiktig driftstemperatur | 1400℃ |
| Kontrollområde | 80-1650℃ |
| Temperatursensor | Platinum-Rhodium Type S thermocouple, measuring range 0-1720℃ |
| Heating Element Location | Surrounding and bottom |
| Temperaturkontrollnøyaktighet | ±1℃ (integrert kretskontroll, ingen overskridelse) |
| Temperaturuniformitet | Within ±5℃ (depending on chamber size), tested with imported temperature measurement rings |
| Temperature Control Points | 4-point control: left side, right side, center, and bottom of chamber |
| Oppvarmingshastighet | Fritt justerbar, range: max. 40℃/min, min. 1℃/t |
| Varmeelementer | U-shaped equal-diameter silicon carbide rods (main heating) + high-temperature alloy resistance wire (bottom, surface up to 1450℃). Silicon carbide rod features: fast heating, high thermal efficiency, long life, not easily deformed at high temperatures, easy installation and maintenance, temperature up to 1500℃ |
| Ovnskropp | CNC maskinert, polert, sanded, acid-washed, fosfatert, powder-coated, and baked. Two-tone color scheme, oxidation-resistant, acid/alkali resistant, corrosion resistant, high temperature resistant, lett å rengjøre. Export quality, mirror baking finish. |
| Furnace Structure | Air-cooled double-layer structure with effective air-cooling guide baffles for overall cold air circulation, cooling the heating element conductive plates before exhausting, preventing high-temperature oxidation and ensuring a good working environment. |
| Loading Platform Operation | Platform and chamber are separate designs. Platform entry/exit and lifting/lowering are PLC-controlled with touchscreen centralized operation. |
| Loading Platform Braking | Entry/exit and lifting/lowering use photoelectric isolation switch sensor signals, processed by PLC, with commands issued via touchscreen. |
| Loading Platform Entry/Exit | Stepless geared motor + lead screw + guide, speed adjustable. |
| Loading Platform Lifting | Electric double-screw lifting with manual powerless descent mechanism (emergency use). |
| Furnace Opening and Platform Sealing | Step cross sealing. Refractory materials have angled surfaces; plattformens åpningsvinkel øker og reduseres gradvis når plattformen lukkes. |
| Lasteplattformens lastekapasitet | 1500KG (customizable according to customer requirements) |
| Ildfast materiale | Lining made of vacuum-formed high-purity alumina lightweight material. High-wear and load-bearing areas (furnace port, bottom) use lightweight hollow ball alumina plates, offering high service temperature, lav varmelagring, resistance to thermal shock, ingen sprekker, ingen avskalling, and good insulation (energisparing >80% compared to traditional furnaces). |
| Isolasjonsmateriale | 4-lag isolasjon: aluminum silicate fiber cotton, alumina fiber bomull, alumina fiberplate, alumina (polycrystalline) fiber board. Energy saving >80% compared to traditional furnaces. |
| Furnace Exterior Surface Temperature | Continuous operation for 20 dager, exterior temperature <45℃ |
| Protection Features | Integrated module control unit with dual-loop control and dual-loop protection, including protection against overshoot, underskudd, segment loss, fase tap, overspenning, overstrøm, over temperatur, gjeldende tilbakemelding, and soft start. |
| Kontrollmetode | Closed-loop technology with thyristor module trigger control, faseskift utløsende. Continuous adjustment of output voltage, nåværende, eller kraft. Features constant voltage, konstant strøm, eller konstante kraftegenskaper. |
| Vis parametre | Temperatur, segmentnummer, segmenttid, gjenværende tid, utgangseffekt prosent, spenning, nåværende, osv. |
| Knapper | Imported push buttons, levetid >100,000 sykluser, med LED-indikatorer. |
| Multi-profile Input | 30-segment programmerbar kontroll: configurable as 1 profile of 30 segmenter, 2 profiles of 14 segmenter hver, 3 profiles of 9 segmenter hver, or 5 profiles of 5 segmenter hver. Multiple profiles can be stored and recalled as needed. |
| Kommunikasjonsgrensesnitt | RS485 communication interface with communication distance up to 1000 meter. Supports touchscreen centralized control of furnace start, pause, stoppe, heating curve setting and reading, parameter setting, osv. Computer display includes measured value, set value, utgangsverdi, segmenttid, segmentnummer, heating curve, power percentage curve. Can store heating curves (retrievable and modifiable), historical curves, and historical reports. Recording interval selectable (1s-1h) with long-term storage capability. |
Bruksområder
- Sintering of Advanced Ceramics: Suitable for the batch sintering of high-performance ceramic materials such as alumina, zirconia, silicon nitride, silicon carbide, and aluminum nitride.
- Heat Treatment of Refractories: Suitable for the high-temperature sintering of refractory materials, including refractory bricks, castables, ceramic fiber products, and magnesia-carbon bricks.
- Heat Treatment of Metals: Suitable for metal heat treatment processes such as annealing, quenching, temperering, and solution treatment.
- Sintering of Powder Metallurgy Products: Suitable for the batch sintering of iron-based and copper-based powder metallurgy products.
- Electronic Ceramics and Components: Suitable for the binder burnout and sintering of electronic ceramics, including piezoelectric ceramics, dielektrisk keramikk, PTC/NTC thermistors, and ceramic substrates.
- Specialty and New Materials Development: Suitable for research into the synthesis and heat treatment processes of new materials such as specialty ceramics, composite materials, and superalloys.
Bedriftsprofil
En profesjonell bedrift som spesialiserer seg på varmebehandlingsteknologitjenester og R&D, produksjon, og salg av høytemperatur elektriske ovner.
Selskapet fokuserer på å utvikle elektriske høytemperaturovner som dekker et fullt temperaturområde på -100 ℃ til 2600 ℃. Produktene inkluderer eksperimentelle elektriske ovner, vakuum atmosfære ovner, industrielle ovner, og middels frekvens induksjonsvarmeutstyr. Hovedprodukter inkluderer boksovner, rørovner, løfteovner, skyveovner, boggieovner, roterende ovner, tunnelovner, og ulike spesialiserte mellomfrekvente ovner.
Selskapet følger teknologisk innovasjon og har bestått ISO9001 og EU CE-sertifiseringer. Det eier 21 registrerte varemerker, 29 patenter, og 27 programvare opphavsrett.
Betalingsmetoder
TT
Forsendelsesmetoder
Den elektriske ovnen er pakket i tre lag: først pakket inn i skumpapir, deretter pakket inn i plastfilm, og til slutt pakket i en trekasse.
FAQ
- What are the advantages of the dual-platform design?
The dual-platform design allows for loading and unloading on one side while production continues on the other, effectively increasing equipment utilization and production efficiency.
- What is the load capacity of the loading platform?
The standard load capacity is 1,500 kg; customization is available based on specific customer process requirements.
- Does it support automatic control?
Ja. The equipment utilizes a PLC and touchscreen control system to enable automatic lifting, operation, and safety protection.
- Can it store sintering process curves?
Ja. The system supports the storage, retrieval, and modification of multiple sets of process curves.
- Does it support remote monitoring?
Ja. The equipment is equipped with an RS485 communication interface, enabling remote monitoring and data management.
